Mikrotron MC13xx Manuel d'instructions

MotionBLITZ®KitInstructionManualMotionBLITZ®Kit Digital Motion Analysis Kit MotionBLITZ®Kit Manual Ver.2.0Copyright  -2006 Mikrotron GmbHMikrotron Gm

3 Starting the Mikrotron MotionBLITZ Director programDouble-click on the following symbol on the Windows XP user interface using the left mouse button

4 Operating ModesBy means of the MotionBLITZ®Kit software (control program) the camera can be set up for recording in different operating modes. 4.1 L

5 MotionBLITZ®Kit in practiceThe full range of functions available and all camera parameters may be set by means of the Motion-BLITZ®Director software

5.2 Selecting resolution, speed, gain, trigger, sync and white balanceThe Histogram button is used to adjust white balance.See details at Whitebalanc

Please make sure the camera is connected correctly. 5.2.1 Resolution and frame rate.You can set the width, the height and the rate of the frame.5.2.2

5.2.8 Trigger In signalThe trigger input is used to stop a current recording with an external signal. See Trigger and Synchronisation inputs. The acti

cording, the recorded frames are displayed simultaneously. After recording, the first (oldest) recorded frame will be displayed.Recording in non circ

5.6 Playback of a sequenceThe frames in the camera may be accessed after recording. Click on one of the forward or backward buttons. Now the frames w

5.7.1 Editing a sequence by using frame slider or keysIf the frame slider has the focus you may use the mouse buttons or the key “b”, “e” and “l” for

5.8 Retrieving saved bmp-filesIf the saved bmp-files are to be viewed, select the directory, the filename and the desired frame numbers in the Menu Fi

1 General ...

MotionBLITZ®Kit Manual Ver.2.0 20

5.10.1 Do the whitebalenceAdjust the size of the green check-line, which is automatically displayed in the camera image, and move this line over a wh

6 Controls and menus in the MotionBLITZ®Kit softwareThere are several menus and controls in the MotionBLITZ®Director program. Each will be described i

Changes to contrast and brightness are relevant for the saved frames! 6.4 Menu FileThe File menu allows- reloading bmp or rec -files for display- sta

6.4.1 Reload image-files6.4.1.1 Reload bmp filesMotionBLITZ®Director loads only bmp-files with 5 digit name endings. Files with the same part be-for

6.4.1.3 Load frame listClick on the radio button "Frame list"The list may be edited in the menuPlay settings. Only the files whose numbers a

6.4.2 Format of the rec headerAll numbers are in decimal formatexample Number of charsremark[RAWHEADER] 32FormatIdentifier= MRAW 32 A CRLF is include

NumberOfSequences= 1 32[SEQUENCES] 32NumberofFrames_00= 1000 32 First sequenceFirstFrameNumber_00= 1 32TriggerFrameNumber_00= 50 (1…x) 32Reftim1_00= 2

ing a name on the keyboard. On the right side of the window it is possible to set the hard disk drive and the path with the mouse. It is essential to

The selection of the frames to store operates in the same manner as described in”Save images in files”MotionBLITZ®Kit Manual Ver.2.0 29

6.1 Moving the camera image

6.4.4 Make Avi FileSelect the avi-filename, the numbers of the frames to be compressed and the compressor-type by clicking on the "Compressor-set

6.4.5 AutoSaveIf the Auto Save mode is activated, frames will be stored to hard disk in the raw data format automatically after the end of a triggered

6.5 View menu6.5.1 RawThe image is displayed as delivered from the camera without any modification and no Bayer color-cal-culations. Thus in Raw mode

6.5.4 InfolineAttaching information to the recorded images is switched on or off. The information portion is dis-played as follows:Framestamp:The uppe

6.5.6 LanguageGerman or English may be selected as language for all texts in the program. 6.6 Record settingsThere are two recording modes:Non circul

6.6.3 Enable trigger input for recordingEnabling this item lets trigger input to start recording. 6.7 Play settingsIn this menu the number of the imag

6.7.2 Frame listThe frame numbers selected via "Single frame" or “from … to” can be added to the frame list by press-ing the “=> frame li

6.8 InfoAt the Info form the details of MotionBLITZDirector and the Firmware of the connected camera will be shown.- Serialnumber of the Camera 30211

7 MaintenanceDuring normal use an occasional cleaning of the optical path is necessary. Information about cleaning the lens is provided by the respect

MotionBLITZ®Kit Manual Ver.2.0 39

8.7.3 Dimensioned drawing, front view of MC13xx

8 Appendix8.1 technical dataMC133x camera Monochrome or color withBayer FilterNumber of pixel 1280 x 1024Pixel size 12 x 12 µmActive area 15,36 (H) x

8.2 Connnector assignments8.2.1 Circular power connector, 6-pinpin signal pin signal1 VCC 4 DGND*2 VCC 5 GND3 STRB 6 GNDTable 8.2-1*DGND ... digital

8.2.2 Camera Link® Connector, MDR-26„Base Camera Link® “ Pinning:pin signal pin signal1 GND 14 GND2 X0- 15 X0+3 X1- 16 X1+4 X2- 17 X2+5 XCLK- 18 XCLK+

8.2.3 Trigger and Synchronisation inputsTrigger Input : Opto Coupler 0Sync Input : Opto Coupler 1The polarity of the active edge can be selected

For all four inputs, the anodes and cathodes of the optocouple LEDs are accessible, just as the emitters and collectors of the four output optocoupler

8.3.3 Input wiring (e.g.: light barrier) with PNP-transistorCalculation of R1 as above with NPN Transistor.8.3.4 Input wiring with a switch and an ext

8.4 Spectral responseMotionBLITZ®Kit Manual Ver.2.0 46

MotionBLITZ®Kit Manual Ver.2.0 47

8.5 Pixel sensitive area Pixel size: 12 x 12 µmFill factor: 40 %Sensitive area: 10,5 x 6,5 µmMotionBLITZ®Kit Manual Ver.2.0 48

8.6 Dimensions8.7 Camera bodyThe camera body is with its dimensions of 63 x 63 x 41 mm (without lens) very compact. To fasten the camera there are two

1 GeneralCongratulations! MotionBLITZ®Kit is an excellent choice, because its an extremely versatile, ad-vanced and self contained digital camera sys

8.7.2 Dimensioned drawing, side view of MC13xx8.7.3 Dimensioned drawing, front view of MC13xxMotionBLITZ®Kit Manual Ver.2.0 50

MotionBLITZ®Kit Manual Ver.2.0 51

1.2.3 Pour utilisateurs au CanadaCet appareil est conforme aux normes Classe A pour bruits radioélectriques, spécifiées dans le Règlement sur le broui

1.4 Warranty NoteDo not open the body of the camera. The warranty becomes void if the camera body is opened.1.5 Remarks, WarningsThis document contain

2 Installation of MotionBLITZ®Kit2.1 Minimal system requirements (PC)For error-free operation of MotionBLITZ®Kit the following minimum PC specificatio

2.4 Installation of Inspecta-5 for Windows 2000/XP2.4.1 How to install the Inspecta-5• Start Windows 2000/XP. You should not have installed the frameg